Civil Engineer Notebook

  SPECIFIC GRAVITY TEST OF COARSE AGGREGATE AIM: To determine the Specific gravity of the aggregate using Pycnometer . APPARATUS REQUIRED: 1. Pycnometer of about 1 litter capacity 2. Weighing balance, with an accuracy of 1g.                  3. Vacuum pump  4. Oven                                                                                           SAMPLE: The sample of 2000g to 1000g of aggregate shall be taken for tested. The aggregate which have been heated artificially shall not be taken. Reference IS: 2386 (Part III) – 1963 ). ads PROCEDURE: 1. A sample of 1kg for 10mm to 4.75mm size and 500gm for less than 4.75mm size. The sample is placed in a tray and fully covered w...

 PARTICLE SIZE DISTRIBUTION TEST - SIEVE ANALYSIS AIM: To determine the Particle Size Distribution of the Aggregate by Sieve Analysis. APPARATUS REQUIRED: 1. Set of IS Sieve           2. Weighing Balance PROCEDURE: 1. The test sample is dried to a constant weight at a temperature of 110 ± 5oC and weighed. 2. The sample is sieved by using a set of IS Sieves for 5 minutes. 3. On completion of sieving, the material on each sieve is weighed. 4. Cumulative weight passing through each sieve is calculated as a percentage of the total sample weight. 5. Fineness modulus is obtained by adding cumulative percentage of aggregates retained on each sieve and dividing the sum by 100. OBSERVATION: Tabulation for Coarse Aggregate: SI.No Sieve Size Weight Retained Cumulative Weight Retained Cumulative % Retained Cumulative % Passing 1 80     ...